Clinical Chemistry, Vol 22, 2045-2045, Copyright © 1976 by the American Association for Clinical Chemistry

Sample Stability: A Suggested Definition and Medthod of Determination

¹ Bio-Science Laboratories Dept. of Research, 7600 Tyrone Ave., Van Nuys, Calif. 91405; and (A.H.R.) Management Science Dept., Calif State Univ. Northridge, Northridge, Calif. 91324

Volume 22

p 52, colunm 1: In two palces, "-GT/ml" should read "-GT/CC." In Figures 2 through 4 in this paper, the "X800" in the legend refers to the original magnification.

p 179: In Table 2, in the —20 °C experiment, the "test statistic" of samples 5 through 18 should be more negative by 0.5 and that of sample 24 should be —7.0 rather then —5.0. These change do not affect the conclusions.

p 197, column 1: In the first full paragraph, reference "(2)" should read "(21)."

p 777: In Figure 1, structures B and C should not contain an endocyclic double bond (structure A is correct)-i.e., the double bonds at the tops of the seven membered ring should be single bonds.

p 833: Corrections to this Table are detailed in a Letter to the Editor, p 1751, q.v.

p 1324: The drawing for Figure 2 has been interchanged with the drawing in the upper half of Figure 9, p 1327.

p 1427: Richard S. Schifreen should be listed as an author.

p 1745, column 1: The [³H]cortisl belongs to ref. 1, and was not supplied by Diagnostic Products Corp.

p 1751, column 3, first paragraph: 9.7 mg/liter should read 0.7 mg/liter.