Clinical Chemistry AACC Online Job Center
HOME HELP FEEDBACK SUBSCRIPTIONS ARCHIVE SEARCH TABLE OF CONTENTS
 QUICK SEARCH:   [advanced]


     


Clinical Chemistry 24: 2199-2202, 1978;
This Article
Right arrow Full Text (PDF)
Right arrow Submit an electronic Letter to
the Editor about this paper
Right arrow Alert me when this article is cited
Right arrow Alert me when eLetters are posted
Right arrow Alert me if a correction is posted
Services
Right arrow Email this article to a friend
Right arrow Similar articles in this journal
Right arrow Similar articles in PubMed
Right arrow Alert me to new issues of the journal
Right arrow Download to citation manager
Right arrow reprints & permissions
Citing Articles
Right arrow Citing Articles via Google Scholar
Google Scholar
Right arrow Articles by Levinson, S. S.
Right arrow Search for Related Content
PubMed
Right arrow PubMed Citation
Right arrow Articles by Levinson, S. S.

Clinical Chemistry, Vol 24, 2199-2202, Copyright © 1978 by American Association for Clinical Chemistry

Kinetic centrifugal analyzer and manual determination of serum urea nitrogen, with use of o-phthaldialdehyde reagent

SS Levinson

o-Phthaldialdehdye reagent was used in assaying urea with a miniature centrifugal analyzer. Seventeen samples can be assayed kinetically in 2 min at a current cost of less than a penny per test. The reaction is initiated in the instrument upon simultaneous mixing of the o- phthaldialdehyde reagent containing 10 microliter of sample with dilute sulfuric acid/N-(1-naphthyl)ethylenediamine dihydrochloride reagent. The reaction is monitored kinetically at 546 nm during the initial 2 min, when the rate is nearly constant. The reaction of o- phthaldialdehyde with urea reaches equilibrium by about 7 or 8 min, but the method cannot be used for end-point analysis because of interference by the blank reaction. A 1.2 g/liter solution of o- phthaldialdehyde used in conjunction with 2 mol/liter sulfuric acid solution was found to be most suitable for centrifugal analyzers. I also describe a manual version of the procedure that gives a linear standard curve up to 1.0 g of urea nitrogen per liter.





HOME HELP FEEDBACK SUBSCRIPTIONS ARCHIVE SEARCH TABLE OF CONTENTS
Copyright © 1978 by the American Association for Clinical Chemistry.