|
|
||||||||
Clinical Chemistry, Vol 28, 440-443, Copyright © 1982 by American Association for Clinical Chemistry
BF Rocks, RA Sherwood and C Riley
In this flow-injection system for direct determination of lithium in serum by atomic absorption spectroscopy, the 10-microL sample is manually injected into a continuously flowing non-segmented stream of de-ionized water, which is pumped, via a dispersion tube, to the spectrometer's nebulizer. Controlled dispersion of the sample zone, before it is introduced into the nebulizer, produces the required sample dilution. Effects of varying the length of the dispersion tube, the flow rate, and the sample size were studied. Analytical readout is obtained, in the form of transient peaks, 5 s after sample injection. It is necessary to include physiological concentrations of sodium and potassium in the standard because each of these cations enhances the lithium absorbance signal. Analytical recovery (98.5 to 101%) and CV (about 2%) are good, and results compare well with those obtained by aspiration of prediluted samples (n = 121, r = 0.99).
The following articles in journals at HighWire Press have cited this article:
![]() |
J.D. McCarty, S.P. Carter, M.J. Fletcher, and M.J. Reape Study of Lithium Absorption by Users of Spas Treated with Lithium lon Human and Experimental Toxicology, January 1, 1994; 13(5): 315 - 319. [Abstract] [PDF] |
||||
| HOME | HELP | FEEDBACK | SUBSCRIPTIONS | ARCHIVE | SEARCH | TABLE OF CONTENTS |